H301-diSPIM
The Okolab solution to enable long term experiments on ASI diSPIM set-up
Features:
- Compatible with ASI diSPIM set-up
- Operated by Okolab BOLD LINE temperature/gas/humidity controllers
- It includes the specimen holder for 2"x3" inserts with rounded corners like the ASI I3078
- Uniformly heated by means of embedded electric resistances both in the base and in the lid of the chamber
- Collars for objectives in use, included
- Quick opening chamber's design
- Recommend humidity module: HM-ACTIVE
![H301-diSPIM_480X320.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-diSPIM/H301-diSPIM_480X320.jpg)
![H301-diSPIM_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-diSPIM/H301-diSPIM_420X280.jpg)
Koehler illumination ?
Remove the chamber riser and use the Koehler Lid
![H301-diSPIM_components_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-diSPIM/H301-diSPIM_components_420X280.jpg)
Perfusion ?
Each chamber features up to 12 holes for inlet and outler of perfusion tubings
![H301-diSPIM_EXPLODED_420X280.jpg](/images/okaImages/product_categories/live_cell_imaging/top_satge_incubator/gas_chambers/H301-diSPIM/H301-diSPIM_EXPLODED_420X280.jpg)
Different sample holder ?
Change the chamber insert. It is a 5 seconds task with the magnetic sample holders
Keep the sample in the correct position by using the Magnetic Locks